logo

Dynamic Behaviour of Additively Manufactured Structures & Materials

DYMAT 2022



26th Technical Meeting
12-14 September 2022
Freiburg, Germany

Scope

Dynamic behaviour of additively manufactured structures, meta-materials, and the constitutive properties of their base materials.

Behaviour under conditions of high-rate deformation

Additive manufacturing of parts that are used in situations where crashworthiness is important has increased significantly over the recent years.

In particular, 3D metal printing has become available to research institutions and is already used in select industries including aerospace and defense, while the automotive sector is currently exploring possibilities for application.

Yet, little is known about the behaviour of additively manufactured parts under conditions of high-rate deformation such as crash and impact.

The 2022 DYMAT workshop provides a forum for scientific exchange and social networking in this field of research.

Focus on processes, materials and structures

The workshop will focus on a number of topics relevant to the dynamic behaviour of additively manufactured parts:

  • metal, ceramic, and polymer manufacturing processes
  • material models for the underlying base materials
  • resultant behaviour of meta-materials or structures
  • experimental techniques required to investigate such materials
  • simulation approaches required to predict behaviour and interpret experiment findings
background

Venue

The Technical Meeting will be held in Freiburg. The university town is located in the Swiss-French-German border region between the Black Forest, the Rhine, and Alsace. Freiburg is known for it's good weather and warm temperatures. It is surrounded by Europe's largest white wine growing region.


The meeting will take place at the Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI.
EMI is one of the leading research institutions focusing on dynamic processes in materials and structures. The institute features facilities for dynamic testing across several length-and time-scales as well as a comprehensive additive manufacturing laboratory.

Program

Overview 26th Technical Meeting

Sunday
11.9.
  • .
  • .
  • .
  • .

  • 18:30 Welcome reception and registration

Monday
12.9.
  • 8:00 Registration
  • 9:00 Talks
  • 12:30 Lunch
  • 14:00 Talks
  • 17:15 DYMAT Assembly

  • 19:30 Social Dinner
Tuesday
13.9.
  • .
  • 9:00 Talks
  • 12:30 Lunch
  • 14:00 Talks
  • 16:00 Bus transfer and
    visit to vineyard / wine tasting
  • 19:30 Social Dinner
Wednesday
14.9.
  • .
  • 9:00 Talks
  • 12:30 Lunch
  • 14:00 Lab tour


    17:00 End
  • .
background

Dates


Registration


Start of registration: 1 February 2022

End of early bird registration: 31 May 2022

Registration deadline for presenting authors: 30 June 2022

Start of conference, welcome reception in the evening: 11 September 2022


Abstracts & Papers


Call for abstracts opening 1 February 2022

Deadline for abstract submission: 15 March 2022

Notification of abstracts acceptance: 31 March 2022

Deadline for conference paper submission: 31 May 2022

Notification of presentation type: 15 June 2022

Conference talks

Conference talks will be selected according to this process:

1. All participants intending to present a talk submit a short abstract by email to info@dymat2022.org (deadline 15 March).

2. Your abstract will be evaluated by the scientific committee. If your abstract is accepted, you will be notified to submit a conference paper (approx. 5 pages, deadline 31 May).

3. Based on your conference paper, the scientific committee will decide on the duration of your presentation – regular or extended.

Registration

Prices

Before 31.5.22 After 31.5.22
Regular 400 EUR 450 EUR
PhD students 250 EUR 275 EUR
Accompanying persons 120 EUR 120 EUR

Registration starts in February 2022: only 80 seats

Registration will start on February 1, 2022. The link will redirect to a registration form. Following registration, you will receive a reply email with the payment details. Payment is only possible by bank transfer.


Registration not open yet
background

Proceedings

The submitted papers will form the conference proceedings. These will be published both on-line and in print. Each contribution will be given a DOI to facilitate citation. The book will be handed out at the beginning of the conference.


Please use the the templates provided below. Submit your paper in all cases as a PDF as well as the word or LaTeX files.
Submit the abstract in plain text by email. Send abstracts and papers to info@dymat2022.org

Template Word – dymat2022.docx

Template LaTeX– dymat2022.zip

Practical Information

A pdf will be available from 1 February. It contains all information about arrival, accommodation and other details of the event.

Download coming soon
background
Fraunhofer EMI

Ernst-Zermelo-Str. 4
D-79104 Freiburg

Google Maps

Scientific Committee

Prof. N. Bahlouli
University of Strasbourg, France

Dr. E. Buzaud
CEA, Bordeaux, France

Prof. E. Cadoni
University of Applied Sciences and Arts of Southern Switzerland, Switzerland

Dr. A. Cosculluela
CEA, Bordeaux, France

Dr. HDR H. Couque
Nexter Munitions, Bourges, France

Prof. P. Forquin
Université Grenoble Alpes, France

Prof. F. Galvez
Universidad Politecnica de Madrid, Spain

Dr. G. Ganzenmueller
Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, Germany

Prof. M. Hokka
Tampere University of Technology, Finland

Prof. M. Langseth
Norwegian University of Science and Technology, Norway

Dr. Yaël Demarty
French German research Institute of Saint-Louis, France

Prof. D. Mohr
ETH Zürich, Switzerland

Prof. L. Peroni
Politecnico di Torino, Torino, Italy

Prof. P. Verleysen
Ghent University, Belgium

Prof. P. Viot
Arts et Métiers ParisTech – École Nationale Supérieure d’Arts et Métiers, France

Dr. S. M. Walley
University of Cambridge, United Kingdom


Organizing Committee

Prof. Dr.-Ing. habil. Stefan Hiermaier
Director Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, Germany
Professor at the Gips Schüle Chair for Sustainable Systems Engineering, University of Freiburg / INATECH

Dr. Georg Ganzenmueller
Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, Germany
Gips Schüle Chair for Sustainable Systems Engineering, University of Freiburg / INATECH

Dr. Kilian Kreb
Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, Germany
Gips Schüle Chair for Sustainable Systems Engineering, University of Freiburg / INATECH